Hanging off the bathroom ceiling - step by step
If you want to hang the bathroom ceiling, you have a lot of plans. The project will not be easy, but with some planning it can be done.
1. Planning - direct cladding or ceiling hangers made of metal?
When planning the work in progress, a decision is in the foreground: Should the cladding be directly on the ceiling, or does the do-it-yourself enthusiast want to use metal hangers? The second version makes assembly easier and is therefore more suitable for laymen than direct facing.
In addition, the landlord must decide how he wants to use the resulting space between the ceiling and the covering. Especially in the bathroom, insulating materials, such as rockwool bales, can be accommodated in this interspace.
For static reasons, the viability of planned constructions should always be stated by a specialist.
2. The material plan - minimize the risk of mold
The bathroom has a high level of humidity. Therefore, the do-it-yourselfers can not obstruct any material here because of the increased mold risk. Gypsum fibreboard or gypsum plasterboard drywall panels are mold-prone to high humidity and should not be accommodated. Even wood panels are not the best choice, because they can become unstable due to moisture.
Better are the special lightweight concrete panels, which the do-it-yourselfer worries about in the dimensions of the ceiling. As the mold risk also affects the insulating material, a vapor barrier should also be planned. This requires a vapor barrier film in the dimensions of the ceiling. Cartridge adhesive and special adhesive tape are equally important in order to seal off the film airtight. For the metal hangers, the do-it-yourselfer must also get metal dowels and split pins.
3. The base slats - basic and counter battens made of wood
First step in hanging the bathroom ceiling is a Unterlattungskonstruktion. This consists of ground and counter battens and later carries the lightweight concrete slabs. The battening, the home improvement despite humidity from solid wood, such as impregnated oak wood, build. The vapor barrier later protects the battens and insulating materials against mold formation.
4. Mounting the base battens
The do-it-yourselfer marks the height of the planned battens on the walls. The base battens ideally have a cross-section of six by four centimeters and stand at equal intervals of no more than 100 centimeters. Always place the slats upright and with offset dowels.
5. Conveying battens
The counter battens are applied by the do-it-yourselfer as a cross-brace on the battens. How much distance he leaves, depends on the disguise. Where crossbars and crossbars intersect, use drills and hitch anchors to mount the hangers. The last counter-bat is in waiting position.
6. Inserting the insulating materials
The doorman pushes the insula- tion of the bathroom ceiling between the battens and the ceiling. The waiting position of the last counterattack now pays off. Between the penultimate lath and the wall, the rockwool bales can be pushed through. The insulation is seamless and is transverse to the counter battens.
Find out more about bathroom cover: Design a bathroom cover - the most beautiful options>
Renovation of an old building - Checklist>
Dark room, dark wooden ceiling - the best measures>
Drywall in the bathroom - the best tips>
Material requirements for drywall construction - Checklist>
Suspending ceiling: what does it cost?
These and many other questions we answer in our price radar on the topic of hanging ceiling.
7. Bonding the vapor barrier
The handyman sticks the vapor barrier foil to the basic framework made of insulation and battens. Caution: The film must be completely airtight on the base battens to fulfill its purpose.
Small cracks and leaks around the ceiling hangers are carefully sealed by the DIY shop using special adhesive tape. Towards the wall he closes the film airtight with Katuschenkleber. Pull a piece over the walls on all sides, then the shadow gap is invisible. There must not be a single leak.
8. Suspending the bathroom ceiling with lightweight concrete
In the last step, the bathroom ceiling is suspended with lightweight concrete slabs. The new ceiling panel hangs the do-it-yourselfer in the ceiling hangers. But beware: Only hook in if a professional has ensured that hangers and battens are kept.
With the lightweight concrete cladding, the suspension work is done. The host has done a whole bathroom renovation, which in addition to the new ceiling also ensures sound and heat protection.
Renovate the bathroom: what does it cost?more
These and many other questions we answer on our thematic page around the bathroom renovation!
Damming the ceiling: what does it cost?
We answer these and many other questions in the price radar around the topic of ceiling insulation.