Insulated garages offer more than just parking

Insulated garages offer more than just parking

Garages are not just used as a parking space for cars and lawnmowers. Insulated and heated, they can also be a workshop or party room. Anyone who has ever patched bicycle tires with damp fingers in a frosty and draughty garage recalls having wished for better insulation in addition to gloves. So that the practical workstation remains attractive even in the cold season, it is often recommended to insulate the garage. If this limits living space, lower heating costs are a welcome accompaniment. The first step may be to subsequently seal the door and doors, whether made of metal, plastic or wood.

Here, subtleties must be considered, such as the thickness of the insulating material. If the insulation weighs too much or if it is too thick, the automatic drive will no longer be able to open the door. If you spray sealing foam in a two-walled metal door, you must make sure that it repels water. Otherwise he sucks himself in the course of time and the driver soon presses in vain on the remote control. With pitch, the goal also starts to rust.

To make sure that the subsequent effort is worthwhile, it is advisable to seek advice from experts. Gate manufacturers clarify whether insulation or door replacement makes more sense.

Nightmare Mold

As tempting as the idea of ​​a dense garage may be at first, their disadvantages are so obvious. If air gets stuck, moisture will remain in the room. It drizzles and the car is wet in the garage? Even little dripping water in conjunction with engine heat forms an unholy alliance and the perfect breeding ground for mold and rust.

Just classic car owners know how to sing a song about what they do to keep the body eater away from underbody and gaps. To avoid this trap, garage builders ensure sufficient air circulation. If required, exhaust systems such as fans in the wall or in windows help: as with a good functional jacket, they transport moisture to the outside without allowing rain to penetrate inwards. Professionals measure the level of ventilation required and help with installation.

Which insulation is the right one?

Garage material and construction will determine how and whether to isolate. Anyone who insulates their cultivation area prevents the common wall to the living space from cooling down, causing moisture to precipitate and forming mold. For freestanding models, the professional advises against isolation. However, if they heat up unbearably in summer or even form frost in winter, insulation can help. Then the temperature of the room remains more stable.

For prefabricated garages made of steel, building physicists advise against it, because the various components can hardly be completely filled with insulation. Cold bridges then cause moisture to develop between the wall and the insulating layer. Frequent consequence: The load-bearing structure is rusting.

Wood garages, on the other hand, already have good insulating properties. As long as the room is used sporadically for purposes other than parking, the dam can be omitted.

Demand regulates the heating

In order to be able to use the parking space for work at low temperatures, more than just a proper ventilation. A heat source has to come from. The choice of devices is large, the type of use decides which is the right one. Maybe even a halogen heater for the short-term needs? Like the infrared lamp, it only heats the immediate ambient temperature. Or is the garage so often misappropriated that a higher base temperature seems to make sense? In any case, it saves time and money to get advice from the heating engineer whether the convector, radiator or heat wave heating should be the device of choice.

Video: Garage Over a Full Basement Design in Bozeman, MT|